1
/
/
3
Speed Racewear
2024 年全新皮埃尔·加斯利 BWT 阿尔派车队 X《死侍与金刚狼》比利时大奖赛 F1 车队复刻赛车服
2024 年全新皮埃尔·加斯利 BWT 阿尔派车队 X《死侍与金刚狼》比利时大奖赛 F1 车队复刻赛车服
常规价格
¥754.27 CNY
常规价格
促销价
¥754.27 CNY
已含税费。
结账时计算的运费。
数量
无法加载取货服务可用情况

探索 Speed Racewear 推出的 2024 款皮埃尔·加斯利 BWT Alpine 车队 X《死侍与金刚狼》比利时大奖赛 F1 车队仿赛车服,专为赛车运动爱好者、收藏家和车迷打造。这款赛车服融合了独特的围场风格与舒适实用的设计。
从可选项中选择您喜欢的尺码或款式。图库中展示了产品详情和设计图案,助您放心选购。
这款赛车服的常见问题
这款赛车服采用哪种F1灵感设计?
2024 年全新皮埃尔·加斯利 BWT 阿尔派车队 X《死侍与金刚狼》比利时大奖赛 F1 车队复刻赛车服。这是Speed Racewear独立制作的复刻风格设计,并非车队配发赛车服。请核对图片及所选款式。
是印花款还是刺绣款?
这是热升华印花款。所列面料为涂层300D Cordura聚酯纤维外层,内衬为60%聚酯纤维/40%棉。图案采用印花,并非全刺绣。
如何选择合适尺码?
请测量身高、胸围、腰围、臀围及内腿长。所列选项从110 CM Kids到4X-Large/ Euro 66;尺码标签并非身体测量值。如有疑问或介于两个尺码之间,请在下单前将尺寸发送给Speed Racewear。
有儿童或青少年尺码吗?
带身高标注的选项:110 CM Kids, 120 CM Kids, 130 CM Kids, 140 CM Kids。下单前请向Speed Racewear确认完整身体尺寸,仅凭身高不能确定合身程度。
可以添加姓名、国旗或号码吗?
请使用页面显示的个性化填写栏。未列出的需求或量身定制尺码,请在下单前确认是否可做、位置及费用。
这款赛车服防火或获得FIA认证了吗?
复刻外观不代表防火性能或FIA/SFI认证。本页未提供经过验证的认证编号。如需赛道使用,请在购买前核对赛事要求及赛车服的认证资料。
如何清洗和保养?
请遵循洗护标签。拉好拉链、扣紧魔术贴并翻面,使用冷水、温和洗涤剂及轻柔模式。自然晾干,勿漂白或直接熨烫印花和布章。印制温度不等于安全洗涤温度。
Features
Features
- Abrasion-resistant double-layer Cordura fabric.
- Breathable and lightweight inner lining.
- Gusseted underarms to provide 360 degrees of movement.
- Lumbar and crotch stretch panels for maximum range of motion.
- Soft knit cuffs and inner ankle cuffs.
Material & Sublimation Printing
Material & Sublimation Printing
- Outer fabric: 300D Cordura, 100% polyester with poly-coating.
- Inner lining: 60% polyester and 40% cotton.
- Print: 100% sublimation printed. The design is heat-transferred into the polyester fibres for a permanent, integrated print finish.
Care Instructions
Care Instructions
- Machine wash on a gentle cycle using a mild detergent.
- Use cold or lukewarm water and follow the temperature stated on the garment care label.
- Close all zippers, secure any hook-and-loop closures and turn the garment inside out before washing.
- Wash with similar colours. Avoid bleach, harsh chemicals and fabric softeners.
- Air dry in the shade. Avoid high-heat tumble drying and direct ironing on printed areas.
- Sublimation printing bonds the design into the polyester fibres. The high temperature used during printing is a manufacturing process, not a recommended washing temperature.
- Avoid boiling water and excessive heat to help protect the lining, stretch panels, coating and trims.
Share


